PO BOX 567 KINGSTON, TN 37763 (865) 376-7009 (800) 334-4395 FAX: (865) 376-9103

HOME    AUCTIONS      BROKERED EQUIPMENT     JOIN OUR MAILING LIST

ABSOLUTE AUCTION

COASTAL LUMBER COMPANY
 800 HULL RD .
  KINSTON, NORTH CAROLINA 28504
SATURDAY,  SEPTEMBER 13, 2008  • 10:00 AM EASTERN

 • CAMBIO DEBARKERS • SALEM 6’ HORZ. RESAW • WILLIAMS HOG •
 • COOPER QUAD SCRAGG • INDUSTRIAL BOILER •  

This auction will not affect the on going operation of Coastal Lumber Co., Inc. 

 Note: Coastal Lumber Company has made the decision to liquidate this equipment at absolute auction.  All of the equipment has been removed and is ready to load.  Everything will be offered online at Proxibid .com.  There will be a 7% onsite Buyers Premium and 10% online Buyers Premium.  All buyers paying with a company or personal check must have a bank letter with statement of limits. We do not accept credit cards of any kind. All sales are final and buyer is responsible for removal of equipment.  

Online Bidding Instructions

EQUIPMENT:  
This equipment was taken out of the New Bern Plant and stored at the Kinston sale site. All equipment has been removed and is ready to load. Contact Jimmy Johnson, Coastal Lumber, 252.521.6014 for additional information

-Cambio 40” Ring Debarker; S/N-40071; w/Air Bag Infeed; 75 Hp Motor; Controls
coastal NC 017.jpg (12911 bytes)    coastal nc cambio.jpg (34657 bytes)

-10 Hp Hydraulic Power Pack  

-20’ Endwise Infeed Log Conveyor; w/Drive  
coastal NC 013.jpg (14213 bytes)

-19’ Endwise Outfeed Log Conveyor; w/Tire Hold Down System; Drive

-Deluxe 5’ x 7’ Cab  
coastal NC 016.jpg (10351 bytes)

-5 Hp Hydraulic System  

-MDI Log Metal Detector; Model TWA-2000; S/N-991119; 20’ Long w/18” Belt  
coastal NC 014.jpg (9014 bytes)

-Cambio 35” Ring Debarker; w/Air Bag Infeed  

-(2) Tire Hold Down Infeeds
coastal NC 015.jpg (8069 bytes)

-Cooper Quad Scragg; w/Infeed; Log Turner; (2) 48” Circle Saws; (2) 100 Hp Motors; 5’ x 6’ Control Cab; Computerized Set Works; Outfeed for Section 2; Cant Kickers; (2) 36” Saws; (2) Motors
coastal nc 146.jpg (46265 bytes)    coastal nc 146_1.jpg (39914 bytes)   coastal nc 146_2.jpg (36658 bytes)    coastal nc146_6.jpg (42801 bytes)

coastal nc 146_3.jpg (37112 bytes)    coastal nc 146_5.jpg (42840 bytes)    coastal nc 146_7.jpg (41364 bytes)

-50 Hp Hydraulic Power Pack  

-20’ 4 Strand Heavy Duty Log Deck; w/3 Arm Stop & Loader; Drive
coastal NC 024.jpg (13309 bytes) 

-30” x 65’ Hourglass Rollcase; w/Stop Gate; 4 Arm Stop & Loader; Drive
coastal NC 013.jpg (14213 bytes) 

-Salem Heavy Duty Bar Type Log Turner; w/30 Hp Hydraulic System; Cooling System
coastal NC 012.jpg (14404 bytes) 

-Salem 6’ Horizontal Resaw; S/N-L110192-84; S/N-84110192; w/Air Strain (Max. 30,000); 250 Hp 460 Volt 1180 RPM Motor; 36” x 16’ Hands Off Infeed Rollcase w/Cant Positioner & H/D Drive; 25 Hp & 50 Hp Hydraulic System w/Cooling System; 29” x 12’ Roll Feed System; 34” x 15’ Outfeed Rollcase; 4 Strand Pop Up Transfer; Cant Unloading System; Drives
coastal NC 011.jpg (13888 bytes)    coastal NC 010.jpg (14889 bytes)    coastal NC 021.jpg (13983 bytes)    coastal NC 022.jpg (13905 bytes) coastal NC 023.jpg (13793 bytes)

-12’ x 11’ 4 Strand Transfer Deck; w/120 Roller Chain; Drive

-4’ 5 Strand Tipple System; Air Operated; w/Drive  

- Salem 8’ High x 6 Strand Unscrambler; w/Board Dealing System; Drive
coastal NC 009.jpg (13826 bytes) 

-Williams Pulverizer Hammer Hog; w/34” x 25” Opening; Drop Feed; Bottom Discharge; 100 Hp Motor
coastal nc williams hog.jpg (40167 bytes)  

-High Pressure Radar Blowing System; S/N-T6321; w/100 Hp Motor
coastal NC 008.jpg (12990 bytes) 

-Faulk 5 HP Radar Metering System; S/N-A39965; 3200 Series; 10” x 24”  

-Howell Metal 30 Unit Bin; w/Hydraulic Doors; Dust Collections System; 10 Hp Hydraulic System
coastal NC 007.jpg (6973 bytes) 

-Irvington Moore 6’ Six Arm Slide Arm Stacker; 9' 6 Strand Transfer Deck w/H78 Chain & Drive; 6 Strand Unscrambler w/H78 Chain & Drive; 10' 6 Strand Deck w/81X Chain; Even End System; 15' Deck w/#55D Rooftop Chain; 40' x 8' 3 Section Rollcase w/8" Rolls; 1 Section w/Jump Chain; No Hoist
coastal NC 006.jpg (13742 bytes)
 

-1989 Industrial Waste Fired Boiler; Model WWF600-150; S/N-HMP600-19; w/Flying Dutchman Model FD-010 Fuel Metering System w/Hopper; 56” x 114” Cyclone; Secondary Re-Injection Fan System; Waste Removal System; w/Ceco Pre Fab 55' x 45' Boiler Building Note: This boiler was removed by professional boiler people and has been stored.
coastal NC 001.jpg (41196 bytes)    coastal NC 002.jpg (14066 bytes)    coastal NC 018.jpg (10610 bytes)    coastal NC 019.jpg (16278 bytes) 

-10 Hp Air Compressor

 -Curtis 25 Hp Tank Mounted Air Compressor

-50' 5 Strand Log Deck

-Hanchett Size 54 Shop #977 Table Type Knife Sharpener

-Webster 18" x 80' Vibrating Conveyor; w/Drive

 -Several Large Gear Reducers

 -(5) Motor Control Centers

- Lot of Starters & Disconnects

-Lots of Collector Decks of Various Sizes

-Cornell 6" x 60" Gang Saw; w/Infeed & Outfeed; w/200 HP Motor; w/Extra Saws; S/N-6-60-001-6-95 

BUILDINGS:
Buildings are dismantled and ready to load. No blueprints, sketch of Post & Tin by Rigger.

-Pre-Fab Building; Approximately 87 ft. Wide and 128 ft. Long; Dismantled. No Blueprints, Sketch of Post & Tin by Rigger
coastal nc bldg2.jpg (27904 bytes)

-Ceco Pre-Fab 2 Story Building, 55’ x 100’ Main Section, 58’ x 75’ Addition, 30’ x 65’ Addition
coastal nc bldg.jpg (23275 bytes)

-Steel Supports and Flooring for 2 Story Building

 OFF SITE CONSIGNED EQUIPMENT:
The following equipment is located 1/4 mile from sale site and will be sold by photo at auction site. Contact Elbert Harris 252.522.0288 for information. This equipment is installed and is not ready to load. 

 -5 HP Upright Tank Mounted Air Compressor
coastal nc 5hp air comp.jpg (31262 bytes)

-1995 Dimter Opti Cut Auto Chop Saw; Model 304; S/N-10.6466; w/15 Bay Sorting System
coastal nc dimter.jpg (37617 bytes)

-Metal Shearer; 79" Capacity
coastal nc metal shr.jpg (38758 bytes) 

-Danckert Moulder; S/N-F143
coastal nc danckert mldr.jpg (37034 bytes) 

-Screw Type 15 HP Air Compessor

 -Double End Trim Saw; 48" Capacity; w/Infeed

-1985 Weinig U22A 7 Head Moulder; S/N-022-611; w/Motor Control Center
coastal nc weinig.jpg (40971 bytes)

-Tank Mounted Air Compressor

 -Vondcut Model 6449 Moulder
coastal nc vondcut.jpg (48599 bytes)

 -Smith Single Head Resaw
coastal nc smith resw.jpg (37190 bytes) 

-(5) Whirlwind Air Operated Chop Saw; w/Indexing System
coastal nc whirlwind.jpg (38440 bytes) 

-1998 Grizzly Model 18702 Lathe; Size 13X40GDAR Head  

-Grizzly 40 Mill Drill Milling Machine; Model G112G; S/N-4402444  

-Wadkin Knife Sharpener  

-Lanrapr Stretch Wrap Machine; w/Turn Table  

-36" x 36' Material Belt Transfer  

-20" x 38' Belt Conveyor  

-Custom Built Chop Saw; w/Indexing System  

-3 Arm Tilting Breakdown Hoist Coming into Chop Line System; w/64" wide x 32'  3 Strand Package Deck; w/Stick Removal System; 12' 3 Strand Transfer; Destacker
coastal nc 050.jpg (42171 bytes)    coastal nc 044.jpg (36434 bytes)    coastal nc 052.jpg (34813 bytes)  

-Bush 58" Chipmaster 6 Knife Chipper; w/Horizontal Feed, Top Discharge; S/N-750503; w/125 HP Motor
coastal nc 053.jpg (35752 bytes)
  

-Corley 8 x 54" Bottom Arbor Gang; S/N-74-CR-56C-001; w/Cant Transfer; Straight Edge; w/Dual Shadow Light System; w/150 HP Motor; w/Corley All Steel Husk Frame
coastal nc 054.jpg (40270 bytes)  

-Corley 10' & 7' Lumber Off Bearing Belts  

-Webster 24" x 24' Vibrating Conveyor; w/Drive  

-Corley 4 x 4 Control Cab  and Husk Frame
coastal nc corley cab.jpg (36542 bytes)    coastal nc 063.jpg (34782 bytes)

-1983 Corley 40" 2 Head Block Carriage; S/N-30-NDC-001; w/Tyrone Berry Cable Tightener; w/3 HP Hydraulic Power Pack; End of Track Bumpers; Corley Saw Cab; Corley All Steel Husk Frame; Tyrone Berry 215 Carriage Drive; w/75 Hp Motor; Corley Bar Type Log Turner; Corley 60" x 20' 3 Strand Log Deck w/3 Arm Stop and Loader; w/Nose Skids
coastal nc Corley 2 HB.jpg (33340 bytes)    coastal nc 058.jpg (39906 bytes)    coastal nc 059.jpg (45068 bytes)  
coastal nc 064.jpg (41363 bytes)     coastal nc 065.jpg (41144 bytes)

-Webster 24" x 30 Vibrating Conveyor; w/Fines Section; w/Drive
coastal nc 060.jpg (36306 bytes)  

-Cutler Hammer Motor Control Center  

-Hydraulic Bar Type Cut off Saw; w/Corley 20' Endwise Outfeed w/Long Link Heavy Duty Chain; w/Stop Gates & Log Kickers; w/Log Hold down  

-Webster 18" x 40' Vibrating Conveyor; w/Drive  

-20' Corley Endwise Log Conveyor; w/Infeed to Chop Saw  

-Corley 28' 4 Strand Log Deck; w/4 Arm Stop & Loader; w/Drive  

-HMC 48" Rosser Head Debarker  

-Montgomery ER-26 HDGM Blow Hog; w/100 HP Motor; w/Top Feed, Bottom Discharge; S/N-597
coastal nc mont hog.jpg (44386 bytes) 

-Nissan 90 Dual Wheel Forklift; w/3 Stage Mast; Side Shift
coastal nc nissan.jpg (38787 bytes)

Directions: From Hwy 70 East take 70 Business West Vernon Ave approximately 1/2 mile, turn left on Hull St. & go approximately 100 yards and auction site is on the left. Watch for auction signs
coastal NC map.jpg (81519 bytes)

Airport: Raleigh & New Bern, NC

Motels: Kinston, NC

Auctioneers Motel: TBA

                        

Please Note: All descriptions are conscientiously described by the Seller and Auction Company, however, neither assumes any liability for errors or omissions. Everything is sold "as is - where is" with no expressed or implied warranties. No guarantee of merchantability or suitability for intended usage is given or implied. The successful bidder is responsible for their lot from the time the auctioneer calls the item sold. Neither the Auction Company nor the Seller assumes responsibility for any loss, damage or theft occurring after the hammer falls. Neither the Auction Company nor the Seller assumes any responsibility for any injuries suffered while inspecting, buying or removing equipment. Jurisdiction and venue regarding any legal dispute arising here from shall be held in Roane County Tennessee. Click here For full Terms. 

PAYMENT IS EXPECTED THE DAY OF AUCTION. PLEASE CHECK OUT BEFORE LEAVING THE SALE SITE. PLEASE DO NOT LEAVE THE SALE SITE WITHOUT PAYING! EQUIPMENT  CAN NOT BE  REMOVED UNLESS ITEMS ARE PAID FOR IN FULL. 

All buyers, unless pre-approved by the auctioneer, that will be paying with a personal or company check MUST have a bank letter of guarantee with statement of limits

All buyers paying with personal checks must have a bank letter in order for buyer to bid. Please have your bank letter prior to auction day or at time of registration. 

There will be a $20.00 processing fee for all titles. All titles will be sent by Federal Express. 

LINKS

HOME    AUCTIONS      BROKERED EQUIPMENT     JOIN OUR MAILING LIST

Back to Top

Hit Counter