PO BOX 567 KINGSTON, TN 37763 (865) 376-7009 (800) 334-4395 FAX: (865) 376-9103

HOME    AUCTIONS      BROKERED EQUIPMENT     JOIN OUR MAILING LIST

ABSOLUTE AUCTION

COASTAL LUMBER COMPANY
COUNTY ROUTE 18
NEW BERLIN, NEW YORK 13411-0846
SATURDAY, AUGUST 16, 2008 • 10:00 AM EASTERN

Click here to download sale guide for this auction.

This auction will not affect the on going operations of Coastal Lumber Co.

  • COOPER END DOGGING SCRAGG • MCDONOUGH DOUBLE CUT BAND •
 • MCDONOUGH LINE BAR RESAW • SALEM LP CARRIAGE • MACHINE SHOP •  

Note: Coastal Lumber Company has made the decision to liquidate this equipment at absolute auction.  This auction will not affect the on going operations of Coastal Lumber Co., Inc. Equipment will be offered online via Proxibid .com.  The real estate will be offered subject to owner's confirmation.   There will be a 7% onsite Buyers Premium and 10% online Buyers Premium.  All buyers paying with a company or personal check must have a bank letter with statement of limits. We do not accept credit cards of any kind. All sales are final and buyer is responsible for removal of equipment.  

Click here to request brochure for this auction. 

Online Bidding Instructions

Directions: From I-88 take Rt. 8 north to New Berlin, and turn right onto Co Rt. 13. Go 2 miles & turn right onto CR-18. Go 1/2 mile to mill. Watch for auction signs.

Real Estate:

-14+/- Acres w/Building; To be Offered subject to owner's confirmation by Brian Bullard, Timberland Realty, 1890 E Main St. Falconer, NY 14733, (716) 664-5602. Lic. #30BU0731315.
           

DEBARKER LINE:  

-Carthage 27” Ring Debarker, S/N-RLB49780; w/Controls; Approximately 1 HP Hydraulic Oiling System; Infeed; Outfeed; Hydraulic Press Rolls; Motor & Controls; Balor Variable Speed Control Drive
     

-Extra Parts for Debarker  

-Control Cab of Debarker; w/2 Cameras w/Monitors

-Patz 75’ Barn Sweep; w/Drive
   

-15 HP Hydraulic Power Pack

-Mellott 10 HP Hydraulic Power Pack

-65’ Infeed Endwise Log Conveyor; w/110 Ladder Back Chain
       

-66’ Outfeed Endwise Log Conveyor; w/110 Chain; Bottom Return; Drive

-(2) 25’ 4 Strand Log Decks; w/Stop & Loader; Drives

-Prentice Stationary Knuckleboom

-CTR Portable Saw Buck
   

-Ingersoll Rand 30 HP 3 Stage Tank Mounted Air Compressor

-30 HP Motor

-Air Compressor Frame (No Air Compressor)

-Air Grease Gun

SCRAGG MILL & SAWMILL:

-Cooper End Dogging Scragg; Model D-A; S/N-CM-6066; w/Log Turner; Positioner; (2) 48” Circle Saws; (2) 125 HP Motors; 5’ x 4’ Control Cab; Air Operated Outfeed Lumber Belt; Dump; Capacity  8’ x 16’; 7” x 20”; 25 HP Hydraulic Carriage Drive; Cooling System; 20 HP Hydraulic Power Pack w/Cooling System
           
   

-(6) 48” F Style Circular Saw

-15’ 5 Strand Infeed Deck; w/3 Arm Stop & Loader; Drive; #78 Chain

-36” X 26’ Hourglass Rollcase; w/Stop Gate; 2 Way Log Kickers

-53’ Heavy Duty 4 Strand Transfer Deck; w/Built In Even Roll System
       

-Reckart 70’ Cant Sorting System; 8 Bay System; w/24” X 55’ Rollcase; Stop Gates; w/10" Rolls Cant Dumps; Reckart Heavy Duty Rollcase w/(4) Heavy Duty 2 Way Cant Kickers; 26” X 24’ Spiral Rollcase w/Drives
   

-Wright 2 Ton Crane System; w/Approximately 120’ of Rail Running Length of Mill
   

-18’ 5 Strand Log Deck; w/Nose Skids; 5 Arm Stop & Loader System; Drive

-Salem Log Turner ;w/30 HP Hydraulic Power Pack; Cooling System

-5 HP Hydraulic Power Pack System

-Salem 4 Head Block Carriage; S/N-132649-89; w/Overhead Tong Dogs; Silvatech Controller; 5’ X 6’ Control Cab; Controls; Hydraulic Power Pack; Salem 7 ½ HP Hydraulic System
            

-Industrial Electrical Service DC Drive ; Model M3286; Put in New 1996 ; w/Balor 150 HP 1150 RPM Motor; Drum Package; Cable; Sheaves; IES Industrial Electric Service Reduced Voltage Motor Control Center ; Dust System
       

     

-24” X 12’ Lumber Return Belt

-Lasalign Laser Light System

-McDonough 6’ Double Cut Band Head Rig; S/N-72M-189FR; w/Mechanical Strain; Off Bearing Belt; Oiling System; Hydraulic Hood; WEG 150 HP 460 Volt 1185 RPM Motor; Completely Rebuilt by McDonough in 1995 
           

-Salem 28” X 8’ Slab Drop

-Cornell 748 Combination Gang Edger; S/N-HD4867014-1193; Model HD; w/(2) Moveable Saws; Infeed; Laser Light System; Dual Outfeed System w/4 Tire Hold Down System; 75 HP Motor
       

-10’ 4 Strand Transfer Deck; w/#78 Chain; Air Operated Pop-Up System; Drive

-28” X 13’ Rollcase; w/8” Rolls; Air Operated Stop Gate; Drive

-16’ 4 Strand Transfer Deck; w/#78 Chain; Drive

-McDonough 54” Resaw System; S/N-54-1301; w/McDonough Line Bar Attachment, S/N-LBR-410; Linear Positioner Set; Air Strain on Band Resaw; Oiling System; McDonough Infeed Rollcase w/Cant Positioner & Turner; McDonough Split Rolls; 24’ Outfeed Spiral Roll System w/8” X 43” Rolls; Outfeed; (2) 7’ 5 Strand Transfer Decks w/Drives; Silvatech Controller; WEG 100 HP 460 Volt 1780 RPM Motor; Continental 3 HP Hydraulic Power Pack
           

-Armstrong LH Band Saw Sharpener; w/Clamp and Stands

-20 HP Hydraulic Power Pack; Not Installed

-12’ Waste Conveyor; w/#78 Chain; Drags; Drive

-24” X 28’ Rollcase w/Stop Gate; Spiral Roll Section; 8” Rolls; Drive


-24" x 40' Rollcase w/Drive
   

-11’ 4 Strand Deck; w/Long Link Chain; Drive

-13’ 5 Strand Collector Deck; w/130 Rooftop Chain; Drive
   

-24” X 14’ Heavy Duty Lumber Belt; w/Drive

-17” X 15’ Lumber Belt; w/Drive

-17" x 13' Lumber Belt

-18” X 30’ Lumber Belt

-27’ Belt Conveyor; w/ 18” Belt

-20’ Auger Type Conveyor; w/Link Belt Drive

-Newman LH Drop Saw Trimmer; w/Infeed Transfer Deck; 10’ 5 Strand Collector Deck; Air Operated Lumber Stops; Drive; 7 ½ HP Motor; Being used as 16’ Trimmer – will clear 20’
   

-43’ 5 Strand Collector Deck; w/130 Rooftop Chain; Drive

-36” X 52’ Belt Conveyor; w/Drive

-32” Block Conveyor; w/10” Belt; Drive

-24” X 30’ Belt Conveyor; w/Cover

-26” X 27’ Heavy Duty Rollcase; w/8” Rolls

-24” x 38’ Belt Conveyor

-Ingersoll Rand Screw Type Air Compressor; Model SSR-EP75; S/N-F15751U95339; w/Filtering System; Simonds 200 Amp Disconnect

-Air Tak Air Drying System

-(2) Air Storage Tanks

-Tyrone Berry 3 HP Hydraulic Power Pack; Not Installed

-Hobart Hornet 200 amp Welder; w/Leads

-Approximately 270’ of Patz Barn Sweep Conveyor; w/Incline Section; 20’ Incline Section; Drive

-Approximately 120’ Waste Conveyor w/Ladder Back Chain; Drive

-Webster 18” X 65’ Vibrating Conveyor
   

-6” x 14’ Belt Conveyor

-Webster 18” x 30’ Vibrating Conveyor; w/Fiberglass Section; Fines Section; MDI Metal Detector; Transistor
       

-CM & E 48” Chipper; w/Horizontal Feed; Top Discharge; Pipe & Collector

-150 HP 460 Volt Motor; RPM Unknown

-Fulghum 8’ X 8’ Chip Screen; w/Cyclone; Fuel Metering System
   

-Phelps 36” Triple Trailer Loading System; w/Metering System; 40 HP Motor; Pipe
       

ELECTRICAL:

-G.E. 1600 Amp Main Disconnect; w/AV-Line Panel Board

-Electrical Panel Board; w/Square D 225 Amp Panel Board; G.E. 225 Amp Panel Board; (11) Allen Bradley Size 1 Starters

-Square D 1600 Amp Panel Board

-Allen Bradley 100 HP Reduced Voltage Starter
   

-Electrical Panel w/Square D 400 Amp Panel Board; (2) Allen Bradley Size 2 Starters; (6) Allen Bradley Size 1 Starters; (1) 30 Amp Disconnect

-Electrical Panel; w/(2) Allen Bradley 100 HP Reduced Voltage Starters

-Electrical Panel; w/Square D I-Line 600 Amp Panel Board; (2) Allen Bradley Size 3 Starters; (6) Allen Bradley Size 1 Starters; G.E. 10 KVA Transformer

-MGM 220 KVA Transformer

-MGM 5 KVA Transformer

-Electrical Panel Controlling Cants & Transfer Decks; w/(4) Allen Bradley Size 1 Starters; (4) 30 Amp Disconnects; (1) G.E. 60 Amp Disconnect

-Safetronics 150 HP Soft Type Starter; Model EZ6-180HD; w/(3) Allen Bradley Size 0 Starters w/Built In Disconnects

-(2) Safetronics 200 HP Soft Type Starter; Model EZ6-188HD
   

-Motor Control Center Controlling Auxiliary Motor on Band Saw

-(2) Safetronics 200 HP Soft Type Starter; Model EZ6-188HD
   

-Electrical Panel Consisting Of; Square D 225 Amp Panel Board; (2) Square D 200 Amp Disconnects; (3) Allen Bradley Size 3 Starters; (3) Allen Bradley Size 2 Starters; (2) Allen Bradley Size 1 Starter; (3) Square D 30 Amp Disconnects; 15 KVA Transformer w/Panelboard

-General Electric 3000 Amp Main Disconnect

-Electrical Panel; w/(2) G.E. 400 Amp Disconnects; (4) Size 2 Starters w/Disconnects; (1) 200 Amp Disconnect; (2) Allen Bradley Size 1 Starters w/Disconnects- Electrical Parts

-Baldor Variable Speed Controls

-Extra Band Saws

-Banding Cart & Tools

-(9) Rolls of ¾” Banding

-Extra Gear Reducers

-Motors

-Electrical Panel; w/(1) Simonds 400 Amp Disconnect; (1) Square D 600 Amp Enclosed Circuit Breaker; (1) Square D 60 Amp 230 Panel Board; (3) G.E. Transformers

-Electrical Panel; w/Square D 225 Amp Panel Board; (1) Allen Bradley Size 3 Starter; (9) Size 1 Starters; (1) 30 Amp Disconnect; (1) 60 Amp Disconnect; (1) 225 Amp Breaker

-Allis Chalmers 150 HP Reduced Voltage Starter

-ITE 400 Amp Disconnect

-G.E. 30 KVA Transformer

SORTER:

-22 Bay Hydro Lift Slot Sorter System
   

-(2) 190’ 2 Strand Heavy Duty Stick Transfer Decks
   

-8’ X 18’ Heavy Duty Log Rolls; w/8” Rolls; Infeed

-10’ 6 Strand Unscrambler

-17’ 4 Strand Collector Deck; w/130 Rooftop Chain

-Lot of Lumber Rolls

-(2) Lumber Carts w/Approx 200’ of Rail

-(4) Partial Rolls of Electrical Wire

-35’ 2 Strand Package Deck; w/Hydraulic Hoist; Hydraulic System; Lifting Capacity Approximately 10’

-(2) Electric Heaters

-Kanton 10 HP Tank Mounted Air Compressor

-Electrical Panel w/1600 Amp Panel Board

DRY KILN AREA:

-Gas Fired Boiler System
   

-Ingersoll Rand 5 HP Tank Mounted Air Compressor

-Kanton 5 HP Tank Mounted Air Compressor

-(2) Irvington Moore Dry Kilns in Block Building ; w/Irvington Moore Controls
      

-8’ Cyclone w/Approximately 250’ of 24” Blow Pipe

-Approximately 50 Kiln Carts

-Lots of Catwalk & Steel Supports

LOADER:

-Gehl  Model 4610 Skid Loader

MACHINE SHOP & MISCELLANEOUS:

-Dayton 1 HP Dual Bench Grinder

-W.F. Barnes Pedestal Type Drill Press

-Bridgeport Milling Machine; S/N-J47810

-(3) Steel Work Tables

-Attachments to the Milling Machine

-Cabinet; w/Parts

-Southbend 13” Lathe; w/3' Table

-Ogden R Adams Sharpening Machine

-Industrial Heavy Duty Hydraulic Operated Press

-Bridgeport Milling Machine; S/N-M25998

-Hammering Block

-Dake Industrial Heavy Duty Press

-Powermatic Pedestal Type Drill Press; w/1 HP Motor

-Pawtucket Makers Metal Cutting Machine
   

-2 Ton Electric Chain Hoist; w/Rail

-10,000 Gallon Diesel Fuel Tank

-Extra Gear Head Motors

-Lots of Steel & Steel Racks

-Lathe & Morse Lathe; w/66” Bed

-Wellsaw Model 8 Metal Cutting Saw; S/N-20823

-Custom Built Sander

-Rigid Pipe Threader; w/Attachments

-Hornet 400 Amp Welder; w/Leads

-Hydraulic Oil, Pumps

-Extra Saws for Trimmer; Edger & Rip Saw

-Electrical System

-Mattison 207 Straight Line Rip Saw; S/N-11578

-Acetylene Cart; w/Gauges; Torch & Hose

-Dual Bench Grinder

-Welding Rods & Supplies

-Spare Motors, Gear Reducers, Bearings

-Belting

-Assortment of Chain

-Time Clock

-Chain Saws

- Lot of Bolt Bins
   

-Space Heaters

-Sprockets & Pulleys

-G.E. 225 Amp Panel Board

-100 Amp Panel Board

-Electrical Parts

-Ladders

-Square D 225 Amp Panel Board; w/(13) AB Size 1 Starters

-Electrical Panel w/1600 Amp Panel Board

-Lincoln Idealarc 250 Welder

-Lumber Spraying System; w/Gas Powered Engine

Directions: From I-88 take Rt. 8 north to New Berlin, and turn right onto Co Rt. 13. Go 2 miles & turn right onto CR-18. Go 1/2 mile to mill. Watch for auction signs.

Airport: Binghamton , NY

Motels: Norwich & Binghamton, NY

Auctioneers Motel: Super 8, Norwich, NY 607.336.8880

Please Note: All descriptions are conscientiously described by the Seller and Auction Company, however, neither assumes any liability for errors or omissions. Everything is sold "as is - where is" with no expressed or implied warranties. No guarantee of merchantability or suitability for intended usage is given or implied. The successful bidder is responsible for their lot from the time the auctioneer calls the item sold. Neither the Auction Company nor the Seller assumes responsibility for any loss, damage or theft occurring after the hammer falls. Neither the Auction Company nor the Seller assumes any responsibility for any injuries suffered while inspecting, buying or removing equipment. Jurisdiction and venue regarding any legal dispute arising here from shall be held in Roane County Tennessee. Click here For full Terms. 

PAYMENT IS EXPECTED THE DAY OF AUCTION. PLEASE CHECK OUT BEFORE LEAVING THE SALE SITE. PLEASE DO NOT LEAVE THE SALE SITE WITHOUT PAYING! EQUIPMENT  CAN NOT BE  REMOVED UNLESS ITEMS ARE PAID FOR IN FULL. 

All buyers, unless pre-approved by the auctioneer, that will be paying with a personal or company check MUST have a bank letter of guarantee with statement of limits

All buyers paying with personal checks must have a bank letter in order for buyer to bid. Please have your bank letter prior to auction day or at time of registration. 

There will be a $20.00 processing fee for all titles. All titles will be sent by Federal Express. 

LINKS

HOME    AUCTIONS      BROKERED EQUIPMENT     JOIN OUR MAILING LIST

Back to Top