PO BOX 567 KINGSTON, TN 37763 (865) 376-7009 (800) 334-4395 FAX: (865) 376-9103
PO BOX 567 KINGSTON, TN 37763 (865) 376-7009 (800) 334-4395 FAX: (865) 376-9103
HOME AUCTIONS BROKERED EQUIPMENT JOIN OUR MAILING LIST
EQUIPMENT SURPLUS TO THE CONTINUED OPERATION OF
ROBBINS
MANUFACTURING
13904 ST RD 471
WEBSTER, FLORIDA 33597
SATURDAY, OCTOBER 16, 2010
10:00 AM EASTERN
MCDONOUGH 54 BAND RESAW BREWER 5 HEAD RESAW FORKLIFTS
Note: The
owners have made the decision to sell the Webster, Fl Facility at auction. There
will be a 5%
Onsite Buyers Premium and 10% Online Buyers Premium added to the final
bid price on all equipment sold. All equipment will be sold onsite by digital
photos and LIVE online bidding will be available via www.proxibid.com.
All online buyers must be registered at least 24 hours prior to start of auction
in order to be approved for online bidding. All buyers paying with a company or personal
check MUST have a bank letter with statement of limits. We do not accept
credit/debit cards of any kind. All sales are final and buyer is responsible for
removal of equipment.
FOR EARLY INSPECTION CALL WILLIAM WARD
AT (352) 793-3874
Robbins Mfg will load uninstalled equipment free of charge, but will not
dismantle any equipment.
BUILDINGS:
-Several Pre Fab Buildings over Planer Mill & Sorter
System
PLANING MILL:
-LeROI 60 Hp Screw Type Air Compressor
-Hankison Air Drying System; w/Air Storage Tank
-Matthews 926CCW; Shaft Size 3 7/16;
w/100 HP Motor;
w/150 of Blow Pipe
-6 Cyclone
-Planer 28 Unit Shavings Storage Bin w/Hydraulic Doors
-ASM 8 2 Arm Heavy Duty Tilting Breakdown Hoist
w/Stick
Removal System; w/30 2 Strand Package Deck; w/ASM 25 HP Power Pack
-8 Stacking Sticks
-10 2 Strand Declining Deck
-35 2 Strand Transfer Deck
-Yates American Side Head Sharpener; S/N-B29964
-Yates American A2012 Motorized Planer; w/Top & Bottom
Profile; w/ASM Hydraulic System; Rebuilt 1 Year Ago: Offered Subject to reserve.
-Yates American High Speed Pineapple Feed Table; 8
Bridge; 21 x 10 Hurry Up Belt; Assortment of Extra Heads; Rebuilt 1 Year
Ago
-24 x 13 Belt Conveyor
-20 x 20 Belt Conveyor
-6 4 Strand Collector; w/#78 Rooftop Chain &
Drive
-Lucidyne Technologies Grade Marker Computer Software
System; 1 Year Old
-ASM 8 Heavy Duty Trim Saw; w/Drop Out Removal
System; (92 5/8 Pet Saw & 6 Pet Saw)
-40 2 Strand Transfer Deck
-12 Turn Table; w/Drive
-Claussen All Mark Marking System; 1 Year Old
-Webster 12 x 21 Vibrating Conveyor
-ASM 8 10 Bay Sorter System; w/Carry out Deck; w/60
HP Hydraulic Power Pack
-Several All Steel Lumber Carts
-2 Strand 14 Transfer; w/81X Chain
-4 Strand Unscrambler; w/Hydraulic Drive
-Hemco 4 Package Maker; w/Hydraulic Lift & Lumber
Rolls
-Signode Automatic Strapping System; Model M22LE44T101;
S/N-3426; Capacity 4,000 to 6,000 LBS w/Infeed Rolls; w/Outfeed Rolls w/Squeezer;
w/50 HP Hydraulic Power Pack
-16 x 13 Belt Conveyor; w/Drive
-1994 Hurst Package Boiler w/Feed Water
System; S/N-F750-150-24; w/Propane
Burner; Low Hours; Used Very Little
SAWMILL:
-1999 ASM Sharp Chain System w/McDonough 54 Twin
Bands, S/N-5HMA1502LT & S/N- MA1502RT; w/(2) 125 Hp Motors; Hydraulic Hoods;
ASM Sharp Chain Infeed w/Centering & Log Turning System; ASM Twin Canter
Heads; w/Perceptron Scanner & Optimizer; Lazer Units w/USNA Controls;
Automatic Scan/Scan on the Fly; Photo Cells; 10 x 10 Control Cab; Outfeed
w/Split Rollcase; Transfer Deck w/Board Dealing System; ASM Hydraulic Power
Packs
-3 Strand 80 Log Deck w/Unscrambler
-ASM Cat Singulator; (1 Year Old)
-2001 ASM 2 Saw Edger w/Infeed; w/(2) 100 Hp Motors;
Guided Saw System; 10 x 10 Control Cab; Infeed & Outfeed Rollcase;
Lazer Light System; w/Top Canter Head w/200 HP Motor
-22 2 Strand Transfer Deck w/Drive
-10 2 Strand Transfer Deck w/Drive; 130 Rooftop Chain
-(2) 40 Collector Decks; Drive
-(2) 16 Package Decks w/Drive
-Unscrambler, 2 Strand w/Drive
-(2) 20 x 20 Lumber Belts w/Drive
-Heavy Duty 48 3 Strand Log Deck, 72 Wide, w/Drive
-Log Singulator System, 4 Strand w/Drive
-Mac 6 Gang Saw , Multiple Cutting Pockets Resaw;
w/Automated Infeed w/Skew Pins; Outfeed; w/USNA Controls; w/Automatic Scan/Scan
on the Fly; (2) 150 Hp Motors; Lazer
Lite; w/10 x 10 Control Cab
-Laptop w/Associated Software for Primary Break Downs and Sorter
-20 x 15 Lumber Belt; w/Drive
-8 2 Strand Transfer; w/Cant Stop
-G-Teck Model G0504 16 Horizontal Resaw System
-1995 Brewer 2 Head Band Resaw; S/N-122795; Model
BR-2B-8X12
-14 2 Strand Transfer; w/81X Chain
-Hurricane Air Operated Chop Saw; w/Indexing System; w/Outfeed
& Infeed
-10 2 Strand Transfer w/78 Rooftop Chain
-16 2 Strand Transfer; w/130 Rooftop Chain
-24 x 25 Belt Transfer
-2 Strand 25 Package Deck; w/Drive
-15 2 Strand Transfer; w/130 Rooftop Chain
-4 Strand Unscrambler
-Hemco 10 14 Bay Sling Sorter; 70 Long w/R & L
Controller
-2 Saw Double End Trimmer
-25 HP Hydraulic Power Packs
-Progress 18 x 80 Vibrating Conveyor; w/Drive
-10 HP Hydraulic Power Pack
-Progress 18" x 30' Vibrating Conveyor; w/Drive
-Arasmith Model 50-50H1239DS Lily Pad
Chipper; w/Steel Support; w/Platform; S/N-R1750-1100/SET
-250 HP Chipper Motor
-Air Tek Model JI-0800-1 Air Drying System; w/Air
Storage Tank
-2003 Pierce 8 2 Arm Stacker w/4 Strand Unscrambler;
w/Even End Rolls; w/Hydraulic Hoist; Lumber Rollouts
-Heavy Duty 20 Long High Speed Feed
Table; w/14 Rolls
-16 Belt Conveyor; w/36 Belt;
w/Drive
-(2) 3 Strand 24 Heavy Duty Log Decks;
w/Drives
-Cornell Multiple Saw Trimmer
-14 2 Strand Package Deck; w/Drive
-6 x 20 Dip Tank w/Double Hoist;
w/Hydraulic Power Pack; w/Drain System & Controls
-Peerless Bin, will hold 150 Yards
-Stacking Sticks
-Lots of 8 Stacking Sticks in Metal Bins
-Lots of All Steel Stick Boxes
-Lots of Parts for Machinery
-Lots of Pulleys,
Sprockets; Cylinders, Extra Chain
FILING ROOM:
-Armstrong Stretcher Roll; Model 3-10-C; S/N-18107
-Pacific Hoe Circle Saw Sharpener; Pedestal Type
-McDonough Guide Dresser
-Circle Saw Hammering Block
-Extra Bands for McDonough Band Saw
-Saws for Gang
-1999 Vollmer FS 2A Side Grinder Sharpener; S/N-456
-1984 Vollmer CHC 20H Sharpener; S/N-960
-Wright W-725 Stroke Grinder
-Re-Tipping Table
-Armstrong #4 Left Hand Band Saw Sharpener; S/N-14691;
w/Dust System; w/Back Feeder System
-Swages & Shapers
-Armstrong #4 Stretcher Roll; S/N-18106; w/Hammering
Block; w/Work Table
-Multiple Head Boring Machine w/6 Heads
-Guide Dresser
-Extra Guides for Gang
-Lots of Motors, Gear Reducers &
Motor Controls
-Lots of Pallets of Parts
-40' Trailer Storage Container w/Electric Parts
-Trailer Storage Container w/Constructions Material
EQUIPMENT NOT
INSTALLED:
-Brewer 5 Head Band Resaw; w/Hydraulic Feed; w/Motor
Control Center; w/20 HP Motor on Heads
-Alden Gang Rip Saw
-Motors up to 200 HP
-MCC Cabinets
-Electrical Breakers
-Electrical Disconnects
-MDI Log Metal Detector; w/Log Trough
-MDI Metal Detector for Vibrating Conveyor
-1999 Nicholson 64 Wood Waste Disk Chipper; S/N-7067;
Hydraulic Head
-McDonough 54 Twin Band Resaw; S/N-54-1084-TWR &
S/N-54-1085-TWR
-Numerous Decks & Conveyors
-Kockums Cambio 30 Ring Debarker
-Several Hourglass Rollcases, NI
-Radar Metering System
-Augers
-Belt Conveyors
-Lumber Decks
-Gear Drives
-Pump and Pipes
-Log Sprayer System w/Pumps
FORKLIFTS:
-2000 John Deere 644H Loader; S/N-DW644HX575946; w/Log
Grapple; w/24,000 Hours; w/Quick Attach forks w/Clamp
-Four Yard Quick Attach Bucket
-1999 Taylor TEB-300L Big Wheel Forklift; S/N-S-C4-28092;
w/Cummins 6 Cylinder Engine; w/Enclosed Cab; 8 Forks; Side Shift
-Forano Eaves E300 Big Wheel Forklift, 30,000 LB
Capacity, S/N-CE140690019710, w/Enclosed Cab with Heat & Air Cab; Cummins 6
Cylinder Engine; 8 Forks; Side Shift
-1980 Taylor TY180 Dual Wheel Forklift; S/N-19-15133; w/8
Forks; w/Detroit Engine
-Taylor TY-150 Forklift; S/N-SB1-17505;
w/8 Forks; w/Diesel Engine
-Toyota Model 02-6FDV45 Forklift; S/N-60363; w/Diesel
Engine; w/4 Forks; w/Side Shift; 10,000 Capacity
-Cat DP70 Forklift; S/N-9CP00920; w/Diesel Engine; 4
Forks; Canopy; Side Shift
TRUCKS & TRAILERS:
-East 30 Aluminum Dump Trailer; w/New
Floor & Rebuilt Cylinder
-(3) 48 Flatbed Trailers
EQUIPMENT
LOCATED IN TAMPA, FL.,
THESE ITEMS WILL NOT BE MOVED AND WILL BE SOLD BY
DIGITAL
PHOTO AT WEBSTER, FL AUCTION SITE.
BE SURE TO TAKE ADVANTAGE OF EARLY INSPECTION.
CONTACT WILLIAM WARD AT (352) 793-3874 TO ARRANGE ONSITE INSPECTION.
-2001 Weinig Waco Hydromat 30XL High
Speed Moulder, 8 x 12 Capacity; S/N-36397-105; (5) Profile Heads;
w/Universal Cutting Head; w/Motor Control; w/Parts Including Extra Head; Offered
Subject to Reserve.
-ASM High Speed Infeed Table; w/5 Strand
Transfer; w/Hydraulic Drive; No Shaft on Infeed End of Transfer
-ASM 6 Strand 20 Transfer w/Built in
Even Ender Rolls; w/Hydraulic Drive
-Tilting 3 Arm 6 Breakdown Hoist;
w/30 3 Strand Package Deck; w/Stick Removal System; w/25 3 Strand
Declining Deck w/Drive
-18 x 45 Outfeed Belt from Moulder;
w/Drive
-ASM 2 Stage Hydraulic System w/(1) 50 Hp
Hydraulic Pump & (1) 5 HP Hydraulic Pump
-60 Suction Blower; w/75 HP Motor;
w/Outgoing Pipe
-4 6 Arm Stacker; w/Hoist Transfer;
w/Crowder Infeed Transfer & Outfeed Transfer; w/Cat Walk; w/Controls
-(1) 5 Strand 21 Transfer; w/(1) 5
Strand 30 Transfer w/Drive; w/81 Chain; No Shaft on Stacker End
-(11) All Steel Lumber Rollouts
-30 5 Strand Transfer, 15 Wide;
w/130 Rooftop Chain; w/Drive
-60 of Gravity Rolls
-Whirlwind Model 1000L Air Operated Chop
Saw
-SCMI M3 Gang Rip; w/Motor & Control;
S/N-041423
-SR 43 Rollcase; w/28 Belt;
w/Drive; Infeed to Rip
-Greenlee Double End Tennenor
-Double End Trim Saw; 32 Capacity;
18 Saw; w/Motor
-Waechter Single Head Resaw; w/10 Hp
Motor
-Smith Single Head Resaw; w/15 HP Motor
-Sutton Industrial Air Operated Chop Saw
-8 Belt Transfer; w/Dual Belt &
Hold Down; w/Drive
-24 x 8 Belt Conveyor; w/Drive
-Beveling Machine; w/Motor & Controls
-(2) Dog Earing Machines
-Portable Dust System, 2 Bags
-Portable Dust System, 1 Bag
-Dymoric Strapping Machine
-(2) CE Semi-Automatic Strapping Machine;
Model IY-91
-Advance Packaging System
-Stra Pack Packaging System
-Lot of Miscellaneous Saws
-Weinig Unimat 23 Moulder; 6 x 8
Capacity; w(4) Profile Heads; w/Universal Profile Head; w/Motor Controls
-High Speed Feed Table; w/(1) 6 4
Strand Transfer Deck; w/(1) 30 3 Strand Transfer Deck; w/81x Chain; w/Drive
-(3) GreCon Optimizing Chop Saws; Model
800-4 w/Controls; Not Installed
Directions: From I-75 take exit 301, take SR 50 East to
Tarrytown approximately 10 miles and turn right on SR 471, mill is on the right.
Watch for auction signs.
Airport: Tampa or Orlando, FL
Motels: Brooksville & Clermont, FL
Back to Top
Please Note: All descriptions are conscientiously described by the Seller and Auction Company, however, neither assumes any liability for errors or omissions. Everything is sold "as is - where is" with no expressed or implied warranties. No guarantee of merchantability or suitability for intended usage is given or implied. The successful bidder is responsible for their lot from the time the auctioneer calls the item sold. Neither the Auction Company nor the Seller assumes responsibility for any loss, damage or theft occurring after the hammer falls. Neither the Auction Company nor the Seller assumes any responsibility for any injuries suffered while inspecting, buying or removing equipment. Jurisdiction and venue regarding any legal dispute arising here from shall be held in Roane County Tennessee. Click here For full Terms.
PAYMENT IS EXPECTED THE DAY OF AUCTION. PLEASE CHECK OUT BEFORE LEAVING THE SALE SITE. PLEASE DO NOT LEAVE THE SALE SITE WITHOUT PAYING! EQUIPMENT CAN NOT BE REMOVED UNLESS ITEMS ARE PAID FOR IN FULL.
All buyers, unless pre-approved by the auctioneer, that will be paying with a personal or company check MUST have a bank letter of guarantee with statement of limits
All buyers paying with personal checks must have a bank letter in order for buyer to bid. Please have your bank letter prior to auction day or at time of registration.
There will be a $20.00 processing fee for all titles. All titles will be sent by Federal Express.